Get Your Doors Working Smoothly Again

We've all been there. Door handles are sticking, locks are stiff, and it takes an Olympic pull to get the door to close. At some point, it's just time to get your doorknob and levers adjusted. Whether it's years of wear and tear, foundation shifts, or just because the screws have come loose over time, it's an issue a professional is best equipped to solve. Our service is quick, reliable, and gets your doors working like new again.

Does it take a bit of a tug to get your door to close, or do the handles feel loose on your doors? Not to worry, our service can repair it. We tackle the two most common problems: a rickety latch mechanism and door misalignment. We'll have your doors closing smoothly in no time.

Our door knob adjustment service is comprehensive, so you can trust that we'll get to the root of the problem. That means a complete inspection of the hinges, the lock, and the strike plate on the door jamb. We make sure the strike plate on the door frame is correctly aligned. and then give the whole thing a good lubrication to keep it running smoothly for months to come.

Why Our Door Knob/Lever Adjustment Service Stands Out

Our service is built on diagnosing and fixing the root cause of the problem, not just the symptoms. We're talking about reliable latching, locking, and security here.

Bringing Things Back into Alignment

When the door doesn't quite close like it used to or the latch is "sticky", it's probably because the door isn't correctly aligned with the doorframe, which is important to maintain alignment.

1. Identify the problem: We check the door when it's fully closed to see if it feels like it needs to be pulled or pushed to engage the latch bolt. That usually means the door is out of alignment. We start by checking the door hinges. Tightening the screws on the hinges can sometimes nudge the door back into place.

2. Give that strike plate some TLC: The strike plate is the metal plate on the door frame with holes in it that the latch bolt slides into. If the latch bolt is hitting the strike plate instead of going into the hole, we fix it. We gently loosen the screws and adjust the strike plate for perfect alignment. If the door is severely out of whack, we might need to slightly enlarge the hole in the door frame behind the strike plate.

3. Adjust the strike plate hole: If the strike plate is still a bit wonky, we need to enlarge the hole in the door frame a bit. If the screw holes are all worn out, too, we fill them with some wood filler, so that when we redrill, the strike plate is securely attached to the door latch bolt. We tighten it all up so the strike plate is getting the latch bolt perfectly. The door and door frame need to be spot on for the latch to work correctly.

Mechanical Latch Mechanism TLC

We've all been there - a door handle that's not quite level or a stiff latch. That's usually because of worn or loose components, which we can fix by tightening the screws.

• Tighten up those loose screws: If your lever or knob feels loose, it's likely because the screws that hold the latch assembly together have loosened over time. We remove the knob or lever, tighten the internal screws with a Phillips screwdriver, and ensure the spindle is securely connected to the latch assembly. This usually sorts the problem out right away.

• Check the valve stem and latch assembly: We inspect the latch inside the door to see if it's bent or worn. If so, we'll swap it for a new one so your latch works smoothly again. We make sure the spindle is securely connected to the latch assembly hole.

• Secure that interior door knob: If visible screws don't hold the knob, we use a special tool to tighten it up. We're talking about a tiny set screw on the neck of the knob. This stops the knob from spinning without retracting the latch. It's a simple fix that makes a big difference.

The result is a door handle that works as it should, ensuring proper operation.

A Well-Lubricated Machine

Dirt and wear and tear can make a lock stiff or a knob sticky. We sort this out with oil-based lubricants and ensure everything is in good shape.

1. Get the lock mechanism running smoothly: We use a dry lubricant, such as powdered graphite or silicone spray, on the moving parts. These don't attract dust or dirt that can clog the lock mechanism over time.

2. Get Your Lock Running Smoothly: We give your lock a little TLC by spraying a small amount of graphite powder or specialized lock lubricant directly into the keyhole and then jiggling the key in and out a few times. This helps evenly distribute the lubricant throughout the cylinder. It's crucial for door locks, as a stiff key can be super bad for security.

3. Testing Your Lock: We wipe away any excess lubricant that might have seeped out, then test your lock and the latch a few times. We check whether the key glides in and turns smoothly to lock and unlock the door, and whether the latch bolt slides in and out of the door's frame without any fuss.

We go the extra mile to lubricate your lock thoroughly, so it operates with complete silence and effortlessness.

Guaranteed Results: What Happens When You Choose Us

We guarantee a job well done with our door knob adjustment service, thanks to our attention to detail, precision, and hassle-free lubrication of your door latch.

• Service Scope: We cover door knob adjustment, fixing a sagging door handle, lubricating lock mechanisms, and aligning your door latch bolt perfectly. We've got you covered, whether you've got a deadbolt, standard door lock, or any other type of lock.

• Our Core Focus: Our main priority is safely tightening any loose screws on the spindle and latch assembly and ensuring the strike plates are in the correct place for proper alignment between the latch and the door frame.

• Strike Plate Alignment is an Art: We measure and adjust the strike plate on the door jamb to ensure the latch bolt and deadbolt fit properly, keeping the door securely closed. If needed, we may have to drill out the strike plate holes a bit.

• Tightening Up Loose Screws: We make sure the screws holding the knobs and levers to the spindle (shaft) are snug. And if needed, we'll replace the worn-out latch insert so you can trust your door latch assembly is solid.

• Lubrication Magic: We give your door hardware and the inner lock cylinder a good spritz of silicone lubricant spray or powdered graphite (dry lubricant) to fix stiffness and keep dust at bay. And don't worry, we wipe away any excess lubricant.

• Troubleshooting Time: We take a good look at your door hinges to see if they're sagging and might need a quick tweak to keep your door properly aligned before we touch the strike plate.

We also hook you up with regular maintenance tips, including following the manufacturer's instructions, to keep your door lock and hardware in top shape.

Installation and Reliability: We've Got You Covered

Our repair process is backed by a guarantee that your door hardware will work like new, or we may need to replace it.

A Step-by-Step Guide: How We Get the Job Done

We follow a tried-and-tested process to deliver top-notch door knob repair and ensure the moving parts are in order.

1. Check and Diagnose: We take a closer look at your door to see if the hinges are loose and check the alignment of the latch bolt against the strike plate when the door is closed. We note where the latch or bolt is hitting the plate.

2. Tighten Up: We tighten any loose screws on the door hinges and the knob or lever spindle shaft screws to sort out sagging door handle issues. We secure interior door knob units by tightening the small set screw, if present.

3. Strike Plate Adjustment: If the door latch is out of whack, we loosen the strike plate screws and give it a slight tweak to align it with the door latch bolt. We then tighten the screws firmly and test the door to see if it latches smoothly.

4. Get It Lubricated: We spray some silicone lubricant or powdered graphite into the latch assembly and the lock cylinder key hole. We insert the key and turn it a few times to spread the lubricant and test the smooth operation.

Your Door Latch Repair is Guaranteed

We've got the tools and the know-how to do door knob adjustment repairs for years to come. We know it's not just about the screws; it's about getting the precision of the strike plate alignment just proper application of dry lubricant to the lock mechanism. We follow a precise process for every job.

Whether you've got a door that won't budge or a lock that's hard to key, our expertise in adjusting door knob mechanisms, deadbolts, and repairing misaligned strike plates is unmatched. Trust us to get the job done safely and make your door hardware run smoothly once again. If the problem persists because of an internal lock mechanism issue, we may recommend replacing the latch with a new latch or calling in a professional locksmith.